Memscon - Radio frequency identification tags linked to on board micro-electro-mechanical systems in a wireless, remote and intelligent monitoring and assessment system for the maintainance of constructed facilities.  
Home2012 WorkshopProjectTechnology2010 WorkshopNewsResultsPartnersLinksContact us
Radio frequency identification tags linked to on board micro-electro-mechanical systems in a wireless, remote and intelligent monitoring and assessment system for the maintainance of constructed facilities.
 
 

Release of the sixth MEMSCON Newsletter

Release of the fifth MEMSCON Newsletter

Release of the fourth MEMSCON Newsletter

MEMSCON Facts

Contract No: 036887 

Project total cost:  4.632.430

EC contribution: 3.814.816

Project Start Date: 1/10/2008

Duration: 36 Months

Coordinator: Institute of Communication and Computer Systems (ICCS), Athens, Greece

Instrument: Specific Targeted Research Project
No of partners: 12

 

   You are here: Homepage »
D1.6 Tape-out

EXECUTIVE SUMMARY

The present document describes is a companion to the tapeout file created for the fabrication of the ASIC readout.

Its purpose is to describe the major steps taken in the fabrication of the ASIC and point out problems and solutions encountered and proposed respectively towards a successful submission for fabrication. Details of the functionality of the chip and expected waveforms are given in a separate document (Test-Plan) required by Deliverable 1.9 task 1.4.3.

The present document also describes extra functionality added to the ASIC in view of the expected working conditions of the ASIC, namely ESD events.